Ideal for F call licence and QRP enthusiasts. 

Ideal for Yaesu FT-817 and Icom IC-703

Slip it in your backpack for mountain topping or travelling.

PRICE: $189.95

CAT-10 ANTENNA TUNER 

TM535 500 Watts Antenna Tuner

For those who like the feel of a manual antenna tuner here it is.

Capable of handling the full Australian legal limit of 400 watts pep.

Use it with your rig barefoot at 100 watts pep or with your linear amplifier.

Very broad impedance tuning range with SWR of up to 10:1 

Capable of tuning balanced feeders.

Simple to operate and a great addition to any ham radio operator's shack.

A power and SWR meter capable of reading 500 watts is well over half the price alone, which makes the tuner exceptional value.

$349.95

• HF 1.5 - 30 MHz                      

• Max power: 500 watts

• Impedance range: 10 to 500 ohms unbalanced, 100 to 3000 ohms balanced

• Size: 270mm x 210mm x 90mm

• Weight: 2.7 kg

• Direct reading of forward power, reflected power and SWR 

• Illuminated cross needle meter

Radio Specialists

Authorized Dealer

Z-100 100 Watts Autotuner

The Z-100 will tune with 0.1 to 125 watts (50 watts on 6 meters), making it an excellent choice for almost any radio or operating style. 

Simple operation is the key to the Z-100. Provide a continuous carrier, then press and hold the tune button for 1 second. The Z-100 tunes. The red LED indicates tuner activity and the green LED indicates an SWR of 1.0 to 1.5 (steady Green LED) and 1.5 to 2.0 (blinking Green LED). If your antenna is already resonant, place the tuner in bypass. Pressing and releasing the tune button quickly will bypass the tuner, taking all tuning components out of line.

Operating range is 1.8 to 54 MHz and will tune a 10:1 SWR (3:1 on 6 meters) down to 1.5:1 or less. It will tune almost any coax fed antenna including dipoles, beams, and verticals.

$249.95

For brochure click here

Get the feel for it by reading the user manual then buy it.

For user manual click here

• Microprocessor controlled                     

• High efficiency switched "L" tuning network

• LED indicators for Status and SWR.

• 200 fast memories

• Latching relays, holds tune position forever.

• Optimized, low power consumption tuning algorithm

• Tuning time: 0.5 to 6 seconds, 3.0 average

• Current consumption:

  • Idle - Nearly zero amps.

  • Tuning - 300 mA max

• Voltage requirements: 7 to 18 volts (user supplies power source)

• 1.8 to 54.0 MHz coverage

• Tunes 6 to 800 ohm loads, 10:1 SWR (3:1 SWR on 6 meters)

• Power range: 0.1 to 125 watts (50 watts on 6 meters)

• For Dipoles, Verticals, Vees, Beams and Coax Fed Antennas

• Optional external Balun allows tuning of random length, long wire or ladder line fed antennas

• Enclosure size: 5.5" x 5.25" x 1.5"

• Weight: 14 0z

Radio Specialists

Authorized Dealer

Z-11 100 Watts Autotuner

The Z-11Pro will tune with 0.1 to 125 watts, making it ideal for both QRP and standard 100 watt transceivers from 160 - 6 meters.

The Z-11Pro uses LDG’s state-of-the-art processor-controlled Switched-L tuning network. It will match dipoles, verticals, inverted-Vs or virtually any coax-fed antenna. With an optional LDG balun, it will also match longwires or antennas fed with ladder-line.

The Z-11Pro has 8,000 memories in LDG's exclusive "3-D Memory" array, automatically storing tuning configurations for each frequency and band as you use them, for each of four antennas on the single RF port. Frequency sensing circuitry lets the Z-11Pro “know” your operating band and frequency. Whenever you transmit on or near a frequency you’ve used before, the Z-11Pro retunes from memory almost instantly (even in SSB!). Memories are retained indefinitely.

Rugged and easy-to-read LEDs indicate SWR and status. The Z-11Pro uses latching relays which retain the tuned configuration even when powered down; current draw when not tuning is effectively zero.

Control from the front panel is simple and straightforward; just press Tune while transmitting, and the Z-11Pro will begin a tuning cycle. The Z-11Pro will even tune while you talk on AM or SSB.

Although not required, optional interfaces are available for most Icom and Yaesu transceivers. With the interface, a single button-press transmits a carrier, executes a tuning cycle and returns the radio to its original power and mode.

$299.95

For brochure click here

Get the feel for it by reading the user manual then buy it.

For user manual click here

• 0.1 to 125 watt power range (SSB and CW), 100W on 6M.
• Easy to read LED display for SWR and status.
• 8000 3-D memories for instantaneous band changing.
• Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune.
• Selectable user parameters: Auto/Semi, threshold, and more.
• 1.8 to 54.0 MHz coverage. Built-in frequency sensor.
• Tunes 6 to 1000 ohm loads (16 to 150 on 6M), 6 to 4000 ohms with optional 4:1 Balun.
• For Dipoles, Verticals, Vs, Beams or and Coax Fed Antenna.
• Optional external Balun allows tuning of random length, long wire or ladder line fed antennas.
• Optional interfaces for Icom and Yaesu available.
• Power requirements: 8 to 16 volts DC at 300 mA Max. 25 uA standby current.
• User installable battery holder (not supplied).
• Small Size Enclosure: 7.7L” x 5.0W” x 1.5H”. Weight: 1.5 pounds.

Radio Specialists

Authorized Dealer

AT-100 Pro100 Watts Autotuner

The  AT-100Pro desktop tuner covers all frequencies from 1.8 – 54 MHz.

t features a two-position antenna switch, allowing you to switch instantly between two antennas. 

The AT-100Pro requires just 1 watt for operation, but will handle up to 125 watts, making it suitable for everything from QRP to a typical 100 watt transceiver.

The AT-100Pro includes over 2,000 memories for each antenna, automatically storing tuning configurations for each frequency and band as you use them. Frequency sensing circuitry lets the AT-100Pro “know” your operating band and frequency. Whenever you transmit on or near a frequency you’ve used before, the AT-100Pro can retune from memory almost instantly.

Rugged and easy-to-read LED bargraphs show power and SWR, and a Function key on the front panel allows you to access data like mode and status. The AT-100Pro uses latching relays which retain the tuned configuration indefinitely even when powered down; current draw when not tuning is effectively zero.

The AT-100Pro uses LDG’s state-of-the-art processor-controlled Switched-L tuning network. It will match dipoles, verticals, inverted-Vees or virtually any coax-fed antenna. With an optional LDG balun, you can also use longwires or antennas fed with ladder-line.

Control from the front panel is simple and straightforward; just press Tune while transmitting a carrier, and the AT-100Pro will begin an automatic tuning cycle.

$349.95

For brochure click here

Get the feel for it by reading the user manual then buy it.

For user manual click here

• 1 to 125 watt power range (SSB and CW), 100W on 6M.
• Easy to read LED bargraph display for RF power, SWR and status.
• Over 4200 memories for instantaneous band changing.
• Two position antenna switch. Separate memories for each antenna.
• Tuning time: 0.5 to 6 seconds full tune, 0.2 sec memory.
• Selectable user parameters: Auto/Semi, 125/12.5 watt scale, power save and more.
• 1.8 to 54.0 MHz coverage. Built-in frequency sensor.
• Tunes 6 to 1000 ohm loads (16 to 150 on 6M), 6 to 4000 ohms with optional 4:1 Balun.
• For Dipoles, Verticals, Vs, Beams or and Coax Fed Antenna.
• Optional external Balun allows tuning of random length, long wire or ladder line fed antennas.
• Optional interfaces for Icom and Yaesu available.
• Power requirements: 11 to 16 volts DC at 500 mA Max.
• Small Size Enclosure: 7.5” x 5.5” x 2.0”. Weight: 1.5 pounds.

Radio Specialists

Authorized Dealer